iPhone Sound, Cleaning

If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker

If you can't hear a person's voice clearly, hear crackling, hear static, or have issues with sound quality, learn what to do.

Check your sound settings

If your device has a Ring/Silent switch, move the switch forward—toward the device's display—so that orange isn't showing. If you're using an iPad, you can also swipe down from the top-right corner to view Control Center and make sure that Silent Mode is off. 

Open Settings > Do Not Disturb and make sure that Do Not Disturb is off.

Clean your receivers and speakers

Remove all screen protectors, films, or cases from your device. Check the speaker opening to see if it's blocked or dirty. On iPhone only, make sure that the receiver is not blocked or dirty. If necessary, clean the speaker or receiver opening with a small, soft-bristled brush. Make sure that the brush is clean and dry.

Check the sound on your device

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don't hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

Try making a call

If you hear sound, try making a call with your iPhone and turn on speakerphone. On iPad or iPod touch, make a FaceTime call. If you still can't hear, or hear static or crackling, then your network or reception could be the issue. Try to call again later, or from a different location.

Choose New Location for Numbers (Pages, Keynote, etc.) Documents iCloud error

Choose New Location for Numbers Documents

The location Numbers uses to save new documents to is no longer available. Choose a new location in Settings.

Document Storage

STORE DOCUMENTS & DATA ON:

Automatically upload and store your documents in (null).

HP Photosmart All-in-One Printers - 'Photo Tray Problem'

HP Photosmart All-in-One Printers - The 'Photo Tray Problem' Message Displays on the Control Panel

Issue

The 'Photo Tray Problem' error message displays on the control panel display, and then the product does not print.

Try the following solutions in the order presented to resolve the issue. When one of the solutions resolves the issue, there is no need to continue troubleshooting.

Solution one: Check the photo tray

1. Lift the output tray and extend the photo tray.Figure : Extend the photo tray

2. Remove all photo paper from the photo tray.

3. Slide the photo tray all the way into its slot, as far as it can go.

4. Lower the output tray, and then press the OK button () on the control panel.

• If these steps resolved the issue, you do not need to continue troubleshooting.

• If the issue persists, continue to the next solution.

Solution two: Perform a power reset

1. Press the Power button () to turn off the product.

2. Unplug the power cord from the electrical outlet.

3. Disconnect the power cord from the back of the product.

4. Disconnect the USB cable from the back of the product.

5. Wait 30 seconds, and then reconnect the power cord to the product.

6. Plug the power cord back into the wall outlet. Do not use a surge protector, extension cord, or power strip.

7. Press the Power button () to turn on the product.

8. Reconnect the USB cable to the product.

• If these steps resolved the issue, you do not need to continue troubleshooting.

• If the issue persists, continue to the next solution.

Solution three: Change the copy options

Use the product control panel to change the copy options.

1. Press the down arrow button () to select Copy Menu, and then press the OK button ().

2. Press the down arrow button () to select Paper Size, and then press the OK button ().

3. Press the down arrow button () to select Automatic, and then press the OK button ().

4. Press the down arrow button () to select Paper Type, and then press the OK button ().

5. Press the down arrow button () to select Automatic, and then press the OK button ().

6. Press the down arrow button () to select Set as New Defaults, and then press the OK button (). The Set as New Defaultsmenu opens.

7. Press the down arrow button () to select Yes, change defaults, and then press the OK button ().

• If these steps resolved the issue, you do not need to continue troubleshooting.

• If the issue persists, continue to the next solution.

Step four: Service the product

Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

Reply to Specific Message

With iOS 14 and iPadOS 14, you can reply directly to a specific message and use mentions to call attention to certain messages and people.

How to reply to a specific message

1. Open a Messages conversation.

2. Touch and hold a message bubble, then tap the Reply button .

3. Type your message, then tap the Send button .

You can reply to a specific message in conversations with one person and in groups.